Options for RUGER DOUBLE ACTION REVOLVERS
Please note: these modifications are not available separately unless marked by an asterisk (*) and are otherwise offered only on packages outlined in this section of the catalog.
No. R100 Standard action/trigger tune Provides smoother, softer double-action pull with a crisper, creep-free single-action pull of about 3 ½ – 4 lbs.
R100 $295.00
No. R210 Set headspace and endfloat Headspace is checked and adjusted as required. Endfloat is set to minimum consistent with the gun’s condition. Please note that the barrel-to-cylinder gap may require adjustment if it exceeds .008 – .009 once the endfloat is corrected; see cat. No. R220.
R210 $75.00
No. R220 Set barrel-to-cylinder gap Set at .004 – .005 or as indicated. Includes recutting the forcing cone and shortening the ejector rod, if required.
R220 $180.00
No. R230(*) Hone/ream cylinder throats Undersize throats are adjusted to the proper diameter in improve accuracy and minimize leading.
R230 $90.00
No. R250 Shoot for sight regulation Anytime barrels are removed or installed or front sights are modified or installed, guns should be test-fired to verify windage and elevation, even on adjustable-sight guns. Please note on the order form the general sort of ammo you plan to use. This is very important for proper sight regulation.
R250 $110.00
No. R251 Shoot for sight regulation Specify R251 for fixed-sight guns. Please note on the order form the general sort of ammo you plan to use. This is very important for proper sight regulation.
R251 $155.00
No. R300 Shorten factory barrel Cut to lengths of 3 ½ to 6 inches and crowned in the factory style. The lettering is removed, the crown detailed and the caliber designation remarked. Includes a DX-type front sight base; choice of serrated ramp or patridge blades. Other blades and sight options available; please inquire.
R300 $415.00
No. R301 Install DX base on 4-in factory barrel For the older factory pin-in style front sight 4-in. redhawk barrel. Includes a DX-type front sight base; choice of serrated ramp or patridge blades. Other blades and sight options available; please inquire.
R301 $385.00
No. R320 Custom S&W style barrel For Super Redhawks only, A custom S&W style barrel with integral DX front sight base.
R320 $2,150.00
R330 $320.00
R331 $175.00
No. R400 Black powder cylinder chamfer The graceful, pre-war style cylinder bevel is applied to fluted cylinders. Includes rebluing, if applicable.
R400 $85.00
No. R410 Flute/chamfer unfluted cylinders Lightens and adds a classic touch to unfluted custom cylinders. Not available for factory parts as these have a rollmark which interferes with the procedure.
R410 $350.00
